Nokia Sim solutions

Complete Nokia sim solutions....

1100 1110 1200 1600 1650 1661 2100 2600 2600c 2630 2650 2660 2760 3100 3110 3120c 3200 3210 3220 3250 3300 3310 3510 3650 3660 5100 5110 5200 5210 5220 5300 5310 5500 6020 6030 6060 6070 6085 6100 6101 6111 6120c 6125 6280 6300 6500c 6500s 6510 6600 1 6600 2 6600 f 6600s 6610 6630

Read more

all security test failed solution!

solution :

1. super sd auth or pmm auth than write good or modified pm ( must need pm 1 & 309)
or, 2. sd repair super sd auth or pmm auth than write good or modified pm ( must need pm 1 & 309)

yes! we have this solution
1. first backup rpl ( go > imei and security tab > imei rebuild > backup rpl)
2. erase old pm ( go > pm tab > erase )
3. Reset npc data ( go> imei and security tab> reset NPC data)( must backup rpl before do this)
4. Erase pm again (go > pm tab > erase )
5.Write rpl from backup ( go > imei and security tab > imei rebuild > restore imei)
6. go pm tab > super sd auth or pmm auth > than write good or modified pm ( must need pm 1 & 309)

7. erase pm again

8. Recover CERT ( go>imei and security tab> imei rebuild > recover cert)
9. give full factory reset

your phone must come back from security test failed
it is 100% tasted by me.

Read more

LG cdma service code

LG cdma service code

This LG Codes are different from lg unlock codes.


LGC-300 programming menu + 9 and enter SPC 000000 or may be other SPC typed by user
A-Key press STO for some time while you can see special code enter zone. Type 2539 and enter A-key
LGC-330W programming menu + 4 + 0 and enter SPC 000000 or may be other SPC typed by user.
A-Key type 2539 and enter A-key
LGC-800W 500 programming menu + 0 and enter SPC 000000 or may be other SPC typed by user.
A-Key type 2539 and enter A-key
LGC-510 programming menu + 3 + 0 and enter SPC 000000 or may be other SPC typed by user.
A-Key type 2539 and enter A-key

LG1010 LG4NE1 TP2200 TP2100 Touchpoint SBDB TP 1100 TP5200

1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. Scroll to MIN and press OK
5. Enter 10 digit MIN scroll to SAVE and press OK
6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to complete)
7. Enter SID (4654) and scroll to SAVE and press OK
8. Programming is complete

LG5350

1. Enter ## and enter the OTKSL and press the left soft key under the word “Save”
2. At the Service Program display select Mobile Phone # and press the OK in the center of the 4 way navigation key
3. Enter the 10 digit MIN and press OK
4. Scroll down to 4. Advanced and press OK
5. Scroll to NMSI and press OK
6. Enter the MSID and press OK
7. Scroll down to 9. Amps Phone # and press OK
8. Enter the MSID and press OK
9. Press the END key

Read more

sagem Service Codes

SAGEM Mobile Service Code
This are the segem mobile service code to help mobile repairing. Keep in mind this are not sagem unlock codes. Sagem phones unlocking codes are different from service code.

Segem Secret Codes
*# Commands
to check IMEI number *#06#
Corresp. ID incoming displayed - *#30# followed by send
Your ID. outgoing displayed - *#31# followed by send
Call barr inactive - *#33# followed by send
Call barr inactive - *#35# followed by send
Call Waiting - *#43# followed by send
Your mobile number - *#100# followed by send
DHLRU1 ?meaning? - *#101# followed by send
Transmitter information *#102# followed by send
Current date and time *#103# followed by send
Last caller's number - *#147# followed by send
Call credit and service time left -*#1345# followed by send

Hidden menu sagem phone
Engage one of the menus with the scroller then press *
Application menu: option 1 Version, option 1 Battery
Prom menu: option 1 IMEI number
sagem Sim lock: option 1 Sim lock - press okay for 30 second countdown, C button to cancel (caution with this I don't know what happens when the counter reaches 0!!, it may lock up your telephone's SIM card.

Network: option 1 Option not available
Test LCD: option 1 Symbol 1 Tests screen, option 2 Symbol 2 Tests screen, option 3 Black Tests screen, option 4 For photo Tests screen, option 5 Tests the vibrator

Type MENU - 5 - 1 - 1 - # to enter Engineering menu on SAGEM (RC-712, 721, 815 and 815 plus) mobile phones.

Hope this sagem code help you. Diffrent sagem model may have diffrent code like diffrent unlocking codes. some code may not working with sagem.

Read more

huawei secret codes

C2601
##1236545874
##7412586792
##147852
##23895490582849521668
##258741
#06#
##2147683785
##3258967389


C2605
##1236545874
##7412586793
##3214566871
##147852
##23895490582849521668
##258741
#06#
##2147683785
##3258967389
(SPC399246)


C2606e
##1236545874
##7412586793
##3214566871
##147852
##23895490582849521668
##258741
#06#
##2147683785
##3258967389
(SPC307010)

C2801
##8746846549
##1168453865
##5674165485
##147852
##8541221619
##258741
#06#
##3515645631
##1857448368


C2802
##20080808
##20202020
##20090909
##147852
##20303030
##258741
#06#
##20101010
##1857448368

C2807
##280701
##280703
##280702
##147852
##280704
##258741
#06#
##236985
##369852
#00102448#

Read more

Philips mobile service codes

    * *#06# IMEI
    * *#2254*# Status register: C,BS,RR,MMI,CREAT
    * *#2255*# activate and deactivate the "DEBUG CALL" -Mode; when activated,make a call to busy line an the phone will display some hex codes on the display
    * *#2558*# the time in days, hours and minutes you are connected to the net
    * *#2562*# not clear; the phone reconnect to the net
    * *#2565*# not clear; warmstart ?
    * *#3333*# (NO) blocking -list (15 items)
    * *#2377*# "BEER" : not cler the phone waits a random time and reconnect to net, sometimes make reset
    * *#3377*# Init , Flags , SIM LOCK
    * *#3353*# reset the (NO) BLOCKING list
    * *#7378*# Name, Lenght,SIM phase
    * *#7489*# Philips mobile service Security Code
    * *#7693*# you can activate and deactivate the Sleep Menu (when deactivated the battery will go down!)
    * *#7787*# not clear: Spurious Interrupt
    * *#7948*# Switch Off: not clear: it is a timer or something
    * *#8463*# Some information about the SLEEP MODE: Wake, Sleep Req., Sleep

philips mobile logo

GENIE (TCD838)

    * *#2337*# and it will be activate the beep signal when the phone reconnected to the net.

FIZZ

    * *#8377*# software version
    * *#1234# or *#7489# Security code
    * *#5644*# software version (enlarge)
    * *#8377*# simlock status

OZEO

    * *#5187*# L1TR
    * *#3877*# hanging mobile for a while
    * *#7826*# master reset
    * *#7626*# ?
    * *#7462*# to SIM PHASE 2
    * *#7676*# ?

Read more

Samsung cdma Service Code

Samsung:
All type of phones (old modeles):
NAM programming: 47*869#08#9
Test mode: *759#813580 or 5809540*45680
exit test mode - 02
A-Key: menu + 0, code 25##

Samsung A500

1. Enter ## and the 6 digit OTKSL
2. SERVICE MENU will appear and 1.Basic will be highlighted
3. Press OK
4. Device will display NAM CDMA/ Phone Number
5. Enter 10 digit MIN
6. Press OK (3 times)
7. Display will return to Service Menu. Press END.
8. Programming is complete

Samsung N240 and N400
1. Enter ## and type in the 6 digit OTKSL
2. The display will show SVC MENU and 1. Phone Number
3. Press OK
4. Enter the 10 digit MIN and press OK
5. The display will show NAM with Home SID on the second line (Note: SID is no longer used)
6. Press OK
7. The display will return to the SVC MENU
8. Press END to complete the programming

Samsung Uproar
1. Press MENU key
2. Enter 9 2 0
3. Enter the OTKSL
4. At SVC Menu screen press OK
5. Enter MIN and press OK 4 times
6. Enter SID (4654) and press OK
7. Press END key
8. Programming is complete

Samsung N300
1. Press ## followed by the OTKSL
2. SVC menu will be displayed
3. Press 1 for Phone #




Samsung cellular phone Unlock CODE

Samsung cellular phone SGH-600 : *2767*3855#

samsung S100, S300, V200 : *2767*7822573738#

---A300, A800 : *2767*637#

---X100 : *2767*688#

samsung cellphone sgh-600 mobiles : *2767*3855#

s100,s300,v200 : *2767*7822573738#

s105 mobiles : *2767*7822573738#

After the phone reboots enter the following code : #0111*00000000#

Personalisation cancelled should be displayed. cellular phone is now unlocked

a800,a300 mobiles : *2767*637#

t100 : *2767*media#
*2767*full#
*2767*cust#
*2767*wap#
*2767*stackreset


for example stackreset = 7822573738

e700 : *2767*688#



Here some more codes for samsung T100

*#8999*228# -> Battery status (capacity, voltage, temperature)
*#8999*246# -> Program status for samsung mobile phones
*#8999*289# -> Change Alarm Buzzer Frequency
*#8999*324# -> Debug screens of cellular phone
*#8999*364# -> Watchdog
*#8999*377# -> EEPROM Error Stack
*#8999*427# -> Trace Watchdog
*#8999*523# -> Change LCD contrast
*#8999*544# -> Jig detect
*#8999*636# -> Memory status for samsung phone
*#8999*746# -> SIM File Size
*#8999*778# -> SIM Service Table
*#8999*785# -> RTK (Run Time Kernel) errors
*#8999*786# -> Run, Last UP, Last DOWN
*#8999*837# -> Software Version of new cellular phone
*#8999*842# -> Test Vibrator
*#8999*862# -> Vocoder Reg
*#8999*872# -> Diag
*#8999*947# -> Reset On Fatal Error
*#8999*999# -> Last/Chk
*#8999*9266# -> Yann debug screen (=Debug Screens?)
*#8999*9999# -> Software version
*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown


all samsung s300 and v200 and s500 : Free unlocking by codes

samsung mobile phone s300 and v200 :

*2767*63342# and press green button
*2767*3855# and press green button of samsung cellular phone
*2767*2878# and press green button
*2767*927# and press green button
*2767*7822573738# press button of samsung cellphone


samsung mobile phone s500 : *2767*688#

Read more

Motorola Service Code

Unlock motorola codes for v3 and razr.

motorola cellular T205/T19x
most of the code applicable to Motorola d460,6200,Motorola cellphone 7500,
Motorola Unlock codes for 8200,8400, 8700,V3688.
*#06# -> Displays imei for
*#300# OK -> List the Software & Hardware Version of motorola cellular
*#301# OK -> Full Keypads Functional Test
*#303# Ok -> Set Default Language to English
*304# OK -> Set OFF engineering mode new cellular phone
#304*19980722# -> Set ON Engineering mode
*#305# OK -> Location: 1 OK
*#307# OK -> Engineering Test Mode
*#311# OK -> Phone code changed to default code
*#400# OK -> ADC, Cal val*
*#402# OK -> Adjust Display Intensity/Contrast
*#403# OK -> List the manufacturing Informations of motorola cellular
19980722 OK -> Master Unlock code for Phone & Sim
Lock.
this code are independent of whether it is new cellular phone or pre paid cell phone.And it may work with one model and not working with other model like Unlock Motorola rarz code may not work with motorla v3.
*#302# OK -> Acoustic Test*
*3370# -> Enhanced Full Rate
#3370# -> Deactivate Enhanced full Rate
*#72837726# OK -> Confirm?, Data Saved
1234 OK Phone Code Default
*#0000# OK -> Settings saved, restore set phone
to default language.

new cellular phone EFR:

###119#1#, (OK) to activate EFR mode.
###119#0#, (OK) to deactivate EFR mode.

Code to lock keys. Press together *7
Note: [] (pause) means the * key held in until box appears.

Other Secret Master Codes for Motorola phones.

Select phone line - (use this to write things below the provider name):
[] [] [] 0 0 8 [] 1 []
Add phonebook to main menu of motorola cellphone:
[] [] [] 1 0 5 [] 1 []
Add messages to main menu:
[] [] [] 1 0 7 [] 1 []
Copy SIM memory (phonebook menu):
[] [] [] 1 0 8 [] 1 []
Eng Field options (main menu):
[] [] [] 1 1 3 [] 1 []
Slow (Frequency of search menu):
[] [] [] 1 0 1 [] 1 []
Medium (Frequency of search menu):
[] [] [] 1 0 2 [] 1 []
Fast (Frequency of search menu):
[] [] [] 1 0 3 [] 1 []
Enable EFR:
[] [] [] 1 1 9 [] 1 []
Function :
[] [] [] # # # [] 1 []

Change pin:
[] [] [] 0 0 4 [] 1 []
Unblocking using the "puk" number:
[] [] [] 0 0 5 [] 1 []


You can change motorola cellular GSM frequencies to 900/1800 by entering the enginnering model. Following the below steps:
enter menu and press 048263* quickly, then you will enter the secret engineering menu
under "Opcode"
input 10*0*3 for GSM 900
10*0*4 for GSM 1800
10*0*5 for GSM 1900
10*0*6 for dual band GSM 900/1800
10*0*7 for dual band GSM 850/1900

To add extra message space 4 your Motorola C350 C450 C550 or C650, press menu button, press 048263* quickly, then on the popup menu enter 47 press ok.press 50 and ok.press 1 ok.press 64 ok.press 1 ok.press 186 and ok.You will receive an extra 50 msgs memory space.Switch phone off and back on.(not tested)

Net Monitor ON: * * * 1 1 3 * 1 * [OK]
Net Monitor OFF: * * * 1 1 3 * 1 * [OK]
* - press this until box shown up

Activate RBS (Radio Base Station) Motorola cellphone.

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
This only works with some versions of software.

What's the use of RBS:

Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.




Other Phones from Motorola cellular (CD 160, CD 520, 920, 930)
new cellular phone Motorola CD 160
Press menu and type one of these numbers and press OK:

11 = Status Review for new cellular phone
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer for Motorola cellular
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode.



Free call tip
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.
You should now be able to talk without being billed.


Keyboard lock fo Motorola cellular
if you push * and # on the same time your keyboard locked. When you press it again, you unlock your keyboard.

Supplementary Menu for Motorola cellular
If your Motorola CD920 or 930 has the engineering software, you can get an engineering mode by typing : ***113*1*, but you have to maintain each * during 3 sec to get a square. So 3 squares, 113, 1 square, 1, 1 square, CALL.
If the software is present you have one supplementary menu. To remove it typ ***113*0* like above.

To put the counter to 0 even global counter, just do a reset factory in the Config menu.

In future give u more on Motorola unlock codes for v3 and motorola rarz cellular phone.



Motorola cdma service codes:
motorola unlock codes are diffrent from this motorola service codes and this motorola codes are for cdma phones not for motorola gsm mobile cellular phones.
StarTAC 7760/7860 programming:
Service menu: FCN+0+000000+000000+RCL
Test mode: FCN 00**83786633 STO
V60c programming:
Service menu: 74663 # [Menu] [Menu] (programming code)
Test mode: [Menu] 073887 * (security code = 000000)

Motorola Tarpon (120x)
1. Press 74663 (spells PHONE)
1. Press # MENU MENU quickly
2. Enter OTKSL
3. The work MIN will be highlighted
4. Select the word CHANGE by selecting the top right button
5. Select DELETE. Press and hold the button until clear
6. Have the customer enter the 10 digit MIN number
7. Select OK with the top right button. The “User Activation” screen will appear
8. Scroll to highlight the CDMA Sys ID
9. Select CHANGE by selecting the top right button
10. Enter SID
11. Select OK by selecting the top right button
12. Select DONE with the top left button
13. Press the END key
14. Press # MENU MENU quickly
15. Enter OTKSL
16. The work MIN will be highlighted
17. Select the word CHANGE by selecting the top right button
18. Select DELETE. Press and hold the button until clear
19. Have the customer enter the 10 digit MIN number
20. Select OK with the top right button. The “User Activation” screen will appear
21. Scroll to highlight the CDMA Sys ID
22. Select CHANGE by selecting the top right button
23. Enter SID
24. Select OK by selecting the top right button
25. Select DONE with the top left button
Press the END key

Motorola Phones (ALL)

1. Enter 74663 # FCN FCN
2. Enter OTKSL
3. Enter MIN and press STO
4. Enter SID (4654) and press STO
5. Press STO again – programming is complete
Note: on the Tarpon (120C) you will need to press the MENU key instead of FCN.

Read more

All China mobile reset code

China Phone Secret Code

default user code: 1122, 3344, 1234, 5678

software version: *#800#

software version: *#900#

Restore factory settings: *#987*99#


Factory mode: *#987#

Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200

LCD contrast: *#369#

set default language: *#0000# Send

set English language: *#0044# Send

set English language (new firmware): *#001# Send
]
Engineer mode: *#110*01#




*2767*688# = Unlocking Code

*#8999*8378# = All in one Code

*#4777*8665# = GPSR Tool

*#8999*523# = LCD Brightness

*#8999*3825523# = External Display

*#8999*377# = Errors

#*5737425# = JAVA Something{I choose 2 and it chrashed}

*#2255# = Call List



#*536961# = Java Status Code

#*536962# = Java Status Code

#*536963# = Java Status Code

#*53696# = Java Status Code



#*1200# = AFC DAC Val


#*1300# = IMEI

#*1400# = IMSI



#*2562# = ??? White for 15 secs than restarts.

#*2565# = Check Blocking

#*3353# = Check Code

#*3837# = ??? White for 15 secs than restarts.

#*3849# = ??? White for 15 secs than restarts.

#*3851# = ??? White for 15 secs than restarts.

#*3876# = ??? White for 15 secs than restarts.



#*7222# = Operation Typ (Class C GSM)

#*7224# = I Got !! ERROR !!

#*7252# = Oparation Typ (Class B GPRS)

#*7271# = Multi Slot (Class 1 GPRS)

#*7274# = Multi Slot (Class 4 GPRS)

#*7276# = Dunno

#*7337# = EEPROM Reset (Unlock and Resets Wap Settings)

#*2787# = CRTP ON/OFF

#*3737# = L1 Dbg data

#*5133# = L1 Dbg data

#*7288# = GPRS Attached

#*7287# = GPRS Detached

#*7666# = SrCell Data

#*7693# = Sleep Act/DeAct (Enable or Disable the Black screen after doing nothing for a while)

#*7284# = Class : B,C or GPRS

#*2256# = Calibration Info

#*2286# = Battery Data

#*2527# = GPRS Switching (set to: class 4, class 8, class 9 or class 10)

#*2679# = Copycat feature (Activate or Deactivate)

#*3940# = External loop test 9600 bps

#*4263# = Handsfree mode (Activate or Deactivate)

#*4700# = Half Rate (Activate or Deactivate)

#*7352# = BVMC Reg value

#*8462# = Sleeptime

#*2558# = Time ON

#*3370# = EFR (Activate or Deactivate)

#*3941# = External looptest 115200 bps

#*5176# = L1 Sleep

#*7462# = SIM phase

#*7983# = Voltage/Frequenci (Activate or Deactivate)

#*7986# = Voltage (Activate or Deactivate)

#*8466# = Old time

#*2255# = Call ???

#*5187# = L1C2G trace (Activate or Deactivate)

#*5376# = ??? White for 15 secs than restarts.

#*6837# = Official Software Version

#*7524# = KCGPRS

#*7562# = LOCI GPRS

#*7638# = RLC allways open ended TBF (Activate or Deactivate)

#*7632# = Sleep mode Debug

#*7673# = Sleep mode RESET

#*2337# = Permanent Registration Beep

#*2474# = ???

#*2834# = Audio Path

#*3270# = DCS support (Activate or Deactivate)

#*3282# = Data (Activate or Deactivate)

#*3476# = EGSM (Activate or Deactivate)

#*3676# = Flash volume formated

#*4760# = GSM (Activate or Deactivate)

#*4864# = Dunno doesn't work on newer versions

#*5171# = L1P1

#*5172# = L1P2

#*5173# = L1P3

#*7326# = Accessory (I got Vibrator)

#*7683# = Sleep variable (

#*7762# = SMS Brearer CS (Activate or Deactivate)

#*8465# = Time in L1

#*9795# = wtls key

#*2252# = Current CAL

#*2836# = AVDDSS Management (Activate or Deactivate)

#*3877# = Dump of SPY trace

#*7728# = RSAV done# (Everything went to standart but nothing was deleted)

#*2677# = ARM State (None or Full Rate)

*#8999*636# = Have no clue what it is, i see 20 lines

*#9999# = Software version

*#8999*8376263# = HW ver, SW ver and Build Date

*#8888# = HW version

*#8377466# = Same HW/SW version thing



*#7465625# = Check the locks

*7465625*638*Code# = Enables Network lock

#7465625*638*Code# = Disables Network lock

*7465625*782*Code# = Enables Subset lock

#7465625*782*Code# = Disables Subset lock

*7465625*77*Code# = Enables SP lock

#7465625*77*Code# = Disables SP lock

*7465625*27*Code# = Enables CP lock

#7465625*27*Code# = Disables CP lock

*7465625*746*Code# = Enables SIM lock

#7465625*746*Code# = Disables SIM lock

*7465625*228# = Activa lock ON

#7465625*228# = Activa lock OFF

*7465625*28638# = Auto Network lock ON

#7465625*28638# = Auto Network lock OFF

*7465625*28782# = Auto subset lock ON

#7465625*28782# = Auto subset lock OFF

*7465625*2877# = Auto SP lock ON

#7465625*2877# = Auto SP lock OFF

*7465625*2827# = Auto CP lock ON

#7465625*2827# = Auto CP lock OFF

*7465625*28746# = Auto SIM lock ON

#7465625*28746# = Auto SIM lock OFF



*2767*3855# = E2P Full Reset

*2767*2878# = E2P Custom Reset

*2767*927# = E2P Wap Reset

*2767*226372# = E2P Camera Reset

#*6420# = MIC Off

#*6421# = MIC On

#*6422# = MIC Data

#*6428# = MIC Measurement

#*3230# = Trace enable and DCD disable

#*3231# = Trace disable and DCD enable

#*3232# = Current Mode

#7263867# = RAM Dump (On or Off)

*2767*49927# = Germany WAP Settings

*2767*44927# = UK WAP Settings

*2767*31927# = Netherlands WAP Settings

*2767*420927# = Czech WAP Settings

*2767*43927# = Austria WAP Settings

*2767*39927# = Italy WAP Settings

*2767*33927# = France WAP Settings

*2767*351927# = Portugal WAP Settings

*2767*34927# = Spain WAP Settings

*2767*46927# = Sweden WAP Settings

*2767*380927# = Ukraine WAP Settings

*2767*7927# = Russia WAP Settings

*2767*30927# = GREECE WAP Settings

*2767*73738927# = WAP Settings Reset

*2767*49667# = Germany MMS Settings

*2767*44667# = UK MMS Settings

*2767*31667# = Netherlands MMS Settings

*2767*420667# = Czech MMS Settings

*2767*43667# = Austria MMS Settings

*2767*39667# = Italy MMS Settings

*2767*33667# = France MMS Settings

*2767*351667# = Portugal MMS Settings

*2767*34667# = Spain MMS Settings

*2767*46667# = Sweden MMS Settings

*2767*380667# = Ukraine MMS Settings

*2767*7667#. = Russia MMS Settings

*2767*30667# = GREECE MMS Settings

*335# = Delete all MMS Messages

*663867# = Dump Mm file

#*536961# = WAPSAR enable / HTTP disable

#*536962# = WAPSAR disable / HTTP enable

#*536963# = Serial eable / Others disable

#*53696# = Java Download Mode

#*5663351# = Wap Model ID [Your Model]

#*5663352# = Wap Model ID [SEC-SGH???X/1.0]

#*566335# = Wap Model ID [SEC-SGH???X/1.0]

*2767*66335# = Check on which model it is

*2767*7100# = SEC-SGHS100/1.0

*2767*8200# = SEC-SGHV200/1.0

*2767*7300# = SEC-SGHS300/1.0

*2767*7650# = Nokia7650/1.0

*2767*2877368# = Reset WAP Model ID to standart

Service codes Samsung:

E900 software version: *#5002*8376263#

E900 full reset: *2767*3855#

Service codes Spice:

S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200

S410 engineer mode: *#3646633#

S900 software version: *#8375#

S900 serial no: *#33778#

Service codes Philips:

S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200



Service codes "Chinese" models:

default user code: 1122, 3344, 1234, 5678

Engineer mode: *#110*01#

Factory mode: *#987#

Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200

Restore factory settings: *#987*99#

LCD contrast: *#369#

software version: *#800#

software version: *#900#

Service codes BenQ:

software version: *#300#

test mode: *#302*20040615#

Service codes Pantech:

software version: *01763*79837#

service menu: *01763*476#

reset defaults (phone/user code reset to default): *01763*737381#

Service codes VK-Mobile ??x, 5xx:

software version: *#79#

software version: *#837#

service menu: *#85*364# (hold #)

Service codes VK200, VK2000, VK2010, VK2020, VK4000:

software version: *#79#

service menu: *#9998*8336# (hold #)

reset defaults (phone/user code reset to default): *#9998*7328# (hold #)



Service codes LG:

software version: 2945#*#

KG300 NVRAM format: 2945#*# -> menu 15

Service codes Sony-Ericsson:

J100 software version: #82#



Service codes Fly:

M100 software version: ####0000#

2040(i) reset defaults: *#987*99# Send

MX200 reset defaults: *#987*99# Send

MX200 software version: *#900# Send

SL300m reset defaults: *#987*99# Send

SL300m software version: *#900# Send

SL500m reset defaults: *#987*99# Send

SL500m software version: *#900# Send

MP500 reset defaults: *#987*99# Send

MP500 software version: *#900# Send

Set language to English: *#0044#

Set language to Russian: *#0007#



Service codes Konka:

C926 software version: *320# Send

C926 set default language: *#0000# Send

C926 set English language: *#0044# Send

Service codes GStar:

GM208 (Chinese Nokea 6230+) engineering menu: *#66*#

Set language to English: *#0044#

Set language to Russian: *#0007#

Service codes Motofone-F3:

Motofone F3 software version: **9999* Send

***300* Set SIM Pin

***310* / ***311* SIM Pin ON | OFF

***000* Reset Factory settings

***644* Set Voicemail number

***260* / ***261* Auto keypad lock ON | OFF

***510* / ***511* Voice Prompts ON | OFF

***160* / ***161* Restricted Calling (Phonebook only) ON | OFF

***200608* Send: software version

***200606* Send: software version

***200806* Send: flex version

***250* / ***251* Keypad tones ON | OFF

***470* Select time format

***500* /***501* Prepaid Balance Display ON | OFF

***520* Change language







All China Format Code

--------------------------------------------------------------------------------


*#66*# Set Factory Mode CONFIRMED

*#8375# Show Software Version CONFIRMED

*#1234# A2DP ACP Mode CONFIRMED

*#1234# A2DP INT Mode CONFIRMED

*#0000# + Send : Set Default Language CONFIRMED

*#0007# + Send : Set Language to Russian CONFIRMED

*#0033# + Send : Set Language to French CONFIRMED

*#0034# + Send : Set Language to Spanish CONFIRMED

*#0039# + Send : Set Language to Italian CONFIRMED

*#0044# + Send : Set Language to English CONFIRMED

*#0049# + Send : Set Language to German CONFIRMED

*#0066# + Send : Set Language to Thai CONFIRMED

*#0084# + Send : Set Language to Vietnamese CONFIRMED

*#0966# + Send : Set Language to Arabic CONFIRMED





More some codes for reset mobile china

*#77218114#

*#881188#

*#94267357#

*#9426*357#

*#19912006#

*#118811#

*#3646633#



CHINESE MODELS:



default user code: 1122, 3344, 1234, 5678



Engineer mode: *#110*01#



Factory mode: *#987#



Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200



Restore factory settings: *#987*99#



LCD contrast: *#369#



software version: *#800#



software version: *#900#



set default language: *#0000# Send



set English language: *#0044# Send



set English language (new firmware): *#001# Send


for n95 that trips off on making call use


*#3646633#




>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>



CHINA MOBILE RESET CODES

*#66*# Set Factory Mode CONFIRMED

*#8375# Show Software Version CONFIRMED

*#1234# A2DP ACP Mode CONFIRMED

*#1234# A2DP INT Mode CONFIRMED

*#0000# + Send : Set Default Language CONFIRMED

*#0007# + Send : Set Language to Russian CONFIRMED

*#0033# + Send : Set Language to French CONFIRMED

*#0034# + Send : Set Language to Spanish CONFIRMED

*#0039# + Send : Set Language to Italian CONFIRMED

*#0044# + Send : Set Language to English CONFIRMED

*#0049# + Send : Set Language to German CONFIRMED

*#0066# + Send : Set Language to Thai CONFIRMED

*#0084# + Send : Set Language to Vietnamese CONFIRMED

*#0966# + Send : Set Language to Arabic CONFIRMED

CHINESE MODELS:

default user code: 1122, 3344, 1234, 5678

Engineer mode: *#110*01#

Factory mode: *#987#



Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200

Restore factory settings: *#987*99#

LCD contrast: *#369#

software version: *#800#

software version: *#900#

set default language: *#0000# Send

set English language: *#0044# Send

set English language (new firmware): *#001# Send also

==========

Service codes BenQ:

software version: *#300#

test mode: *#302*20040615#

Service codes Pantech:

software version: *01763*79837#

service menu: *01763*476#

reset defaults (phone/user code reset to default): *01763*737381#

Service codes 3xx, 5xx:

software version: *#79#

software version: *#837#

Service codes VK200, VK2000, VK2010, VK2020, VK4000:

software version: *#79#

service menu: *#9998*8336# (hold #)

reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

Service codes LG:

software version: 2945#*#

Service codes Sony-Ericsson:

J100 software version: #82#

Service codes Fly:

2040(i) reset defaults: *#987*99# Send

MX200 reset defaults: *#987*99# Send

MX200 software version: *#900# Send

SL300m reset defaults: *#987*99# Send

SL300m software version: *#900# Send

SL500m reset defaults: *#987*99# Send

SL500m software version: *#900# Send

MP500 reset defaults: *#987*99# Send

MP500 software version: *#900# Send

Set language to English: *#0044#

Set language to Russian: *#0007#

Service codes Konka:

C926 software version: *320# Send

C926 set default language: *#0000# Send

C926 set English language: *#0044# Send

Service codes GStar:

GM208 (Chinese Nokea 6230+) engineering menu: *#66*#

Set language to English: *#0044#

Set language to Russian: *#0007#

Service codes Motorola:

Motofone F3 software version: **9999* Send

C113, C114, C115, C115i, C116, C117, C118 software version: #02#*

C138, C139, C140 software version: #02#*

C155, C156, C157 software version: #02#*

C257, C261 software version: #02#*

V171, V172, V173 software version: #02#*

V175, V176, V176 software version: #02#*

C168, W220 software version: *#**837#

W208, W375 software version: #02#*

ZTE Mobile1- *938*737381#

2- PHONE WILL DIPLAYED DONE

3- POWER OFF YOUR PHONE AND POWER ON AGAIN

alcatelE205

unlocking phone code,only press***847# without simcard

E900 software version: *#5002*8376263#

E900 full reset: *2767*3855#

Service codes Spice:

S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200

S410 engineer mode: *#3646633#

S900 software version: *#8375#

S900 serial no: *#33778#

Service codes Philips:


S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200

Service codes "Chinese" models:

default user code: 1122, 3344, 1234, 5678

Engineer mode: *#110*01#

Factory mode: *#987#

Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200

Restore factory settings: *#987*99#

LCD contrast: *#369#

software version: *#800#

software version: *#900#

Service codes BenQ:

software version: *#300#

test mode: *#302*20040615#

Service codes Pantech:

software version: *01763*79837#

service menu: *01763*476#

reset defaults (phone/user code reset to default): *01763*737381#

Service codes VK-Mobile 3xx, 5xx:

software version: *#79#

software version: *#837#

service menu: *#85*364# (hold #)

Service codes VK200, VK2000, VK2010, VK2020, VK4000:

software version: *#79#

service menu: *#9998*8336# (hold #)

reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

Service codes LG:

software version: 2945#*#

KG300 NVRAM format: 2945#*# -> menu 15

Service codes Sony-Ericsson:

J100 software version: #82#

Service codes Fly:

M100 software version: ####0000#

2040(i) reset defaults: *#987*99# Send

MX200 reset defaults: *#987*99# Send

MX200 software version: *#900# Send

SL300m reset defaults: *#987*99# Send

SL300m software version: *#900# Send

SL500m reset defaults: *#987*99# Send

SL500m software version: *#900# Send

MP500 reset defaults: *#987*99# Send

MP500 software version: *#900# Send

Set language to English: *#0044#

Set language to Russian: *#0007#

Service codes Konka:

C926 software version: *320# Send

C926 set default language: *#0000# Send

C926 set English language: *#0044# Send

Service codes GStar:

GM208 (Chinese Nokea 6230+) engineering menu: *#66*#

Set language to English: *#0044#

Set language to Russian: *#0007#

Service codes Motofone-F3:

Motofone F3 software version: **9999* Send

***300* Set SIM Pin

***310* / ***311* SIM Pin ON | OFF

***000* Reset Factory settings

***644* Set Voicemail number

***260* / ***261* Auto keypad lock ON | OFF

***510* / ***511* Voice Prompts ON | OFF

***160* / ***161* Restricted Calling (Phonebook only) ON | OFF

***200608* Send: software version

***200606* Send: software version

***200806* Send: flex version

***250* / ***251* Keypad tones ON | OFF

***470* Select time format

***500* /***501* Prepaid Balance Display ON | OFF

***520* Change language

Service codes Motorola:

C113, C114, C115, C115i, C116, C117, C118 software version: #02#*

C138, C139, C140 software version: #02#*

C155, C156, C157 software version: #02#*

C257, C261 software version: #02#*

V171, V172, V173 software version: #02#*

V175, V176, V176 software version: #02#*

C168, W220 software version: *#**837#

W208, W375 software version: #02#*

and "yes"''

chiniss cord & pin out

some chinese Mobile Code And Pinouts :::::::::::>>>>>>>>>

Service codes BenQ:

software version: *#300#

test mode: *#302*20040615#

Service codes Pantech:

software version: *01763*79837#

service menu: *01763*476#

reset defaults (phone/user code reset to default): *01763*737381#

Service codes 3xx, 5xx:

software version: *#79#

software version: *#837#

Service codes VK200, VK2000, VK2010, VK2020, VK4000:

software version: *#79#


service menu: *#9998*8336# (hold #)

reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

Service codes LG:

software version: 2945#*#


Service codes Sony-Ericsson:

J100 software version: #82#

Service codes Fly:

2040(i) reset defaults: *#987*99# Send



MX200 reset defaults: *#987*99# Send

MX200 software version: *#900# Send





SL300m reset defaults: *#987*99# Send

SL300m software version: *#900# Send

SL500m reset defaults: *#987*99# Send

SL500m software version: *#900# Send

MP500 reset defaults: *#987*99# Send

MP500 software version: *#900# Send

Set language to English: *#0044#

Set language to Russian: *#0007#

Service codes Konka:

C926 software version: *320# Send

C926 set default language: *#0000# Send

C926 set English language: *#0044# Send

Service codes GStar:

GM208 (Chinese Nokea 6230+) engineering menu: *#66*#

Set language to English: *#0044#

Set language to Russian: *#0007#

Service codes Motorola:

Motofone F3 software version: **9999* Send

C113, C114, C115, C115i, C116, C117, C118 software version: #02#*

C138, C139, C140 software version: #02#*

C155, C156, C157 software version: #02#*

C257, C261 software version: #02#*

V171, V172, V173 software version: #02#*

V175, V176, V176 software version: #02#*

C168, W220 software version: *#**837#

W208, W375 software version: #02#*

ZTE Mobile1- *938*737381#

2- PHONE WILL DIPLAYED DONE

3- POWER OFF YOUR PHONE AND POWER ON AGAIN

alcatelE205

unlocking phone code,only press***847# without simcard

E900 software version: *#5002*8376263#

E900 full reset: *2767*3855#

Service codes Spice:

S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200

S410 engineer mode: *#3646633#

S900 software version: *#8375#

S900 serial no: *#33778#

Service codes Philips:

S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200

Service codes "Chinese" models:

default user code: 1122, 3344, 1234, 5678

Engineer mode: *#110*01#

Factory mode: *#987#

Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200

Restore factory settings: *#987*99#

LCD contrast: *#369#

software version: *#800#

software version: *#900#

Service codes BenQ:

software version: *#300#

test mode: *#302*20040615#

Service codes Pantech:

software version: *01763*79837#

service menu: *01763*476#

reset defaults (phone/user code reset to default): *01763*737381#

Service codes VK-Mobile 3xx, 5xx:

software version: *#79#

software version: *#837#

service menu: *#85*364# (hold #)

Service codes VK200, VK2000, VK2010, VK2020, VK4000:

software version: *#79#

service menu: *#9998*8336# (hold #)

reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

Service codes LG:

software version: 2945#*#

KG300 NVRAM format: 2945#*# -> menu 15

Service codes Sony-Ericsson:

J100 software version: #82#

Service codes Fly:

M100 software version: ####0000#

2040(i) reset defaults: *#987*99# Send

MX200 reset defaults: *#987*99# Send

MX200 software version: *#900# Send

SL300m reset defaults: *#987*99# Send

SL300m software version: *#900# Send

SL500m reset defaults: *#987*99# Send

SL500m software version: *#900# Send


MP500 reset defaults: *#987*99# Send

MP500 software version: *#900# Send

Set language to English: *#0044#

Set language to Russian: *#0007#

Service codes Konka:

C926 software version: *320# Send

C926 set default language: *#0000# Send


C926 set English language: *#0044# Send
S
e

rvice codes GStar:

GM208 (Chinese Nokea 6230+) engineering menu: *#66*#

Set language to English: *#0044#

Set language to Russian: *#0007#

Service codes Motofone-F3:

Motofone F3 software version: **9999* Send

***300* Set SIM Pin

***310* / ***311* SIM Pin ON | OFF

***000* Reset Factory settings

***644* Set Voicemail number

***260* / ***261* Auto keypad lock ON | OFF

***510* / ***511* Voice Prompts ON | OFF

***160* / ***161* Restricted Calling (Phonebook only) ON | OFF

***200608* Send: software version

***200606* Send: software version

***200806* Send: flex version

***250* / ***251* Keypad tones ON | OFF

***470* Select time format

***500* /***501* Prepaid Balance Display ON | OFF

***520* Change language

Service codes Motorola:

C113, C114, C115, C115i, C116, C117, C118 software version: #02#*

C138, C139, C140 software version: #02#*

C155, C156, C157 software version: #02#*

C257, C261 software version: #02#*

V171, V172, V173 software version: #02#*

V175, V176, V176 software version: #02#*

C168, W220 software version: *#**837#

W208, W375 software version: #02#*

and "yes"''

.................................................. ...............................

=============================================
All Chinese Mobile Code And Pinouts
--------------------------------------------------------------------------------
Hi,,



Service codes BenQ:

software version: *#300#

test mode: *#302*20040615#

Service codes Pantech:

software version: *01763*79837#

service menu: *01763*476#

reset defaults (phone/user code reset to default): *01763*737381#

Service codes 3xx, 5xx:

software version: *#79#

software version: *#837#

Service codes VK200, VK2000, VK2010, VK2020, VK4000:

software version: *#79#

service menu: *#9998*8336# (hold #)

reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

Service codes LG:

software version: 2945#*#

Service codes Sony-Ericsson:

J100 software version: #82#

Service codes Fly:

2040(i) reset defaults: *#987*99# Send

MX200 reset defaults: *#987*99# Send

MX200 software version: *#900# Send

SL300m reset defaults: *#987*99# Send

SL300m software version: *#900# Send

SL500m reset defaults: *#987*99# Send

SL500m software version: *#900# Send

MP500 reset defaults: *#987*99# Send

MP500 software version: *#900# Send

Set language to English: *#0044#

Set language to Russian: *#0007#

Service codes Konka:

C926 software version: *320# Send

C926 set default language: *#0000# Send

C926 set English language: *#0044# Send

Service codes GStar:

GM208 (Chinese Nokea 6230+) engineering menu: *#66*#

Set language to English: *#0044#

Set language to Russian: *#0007#

Service codes Motorola:

Motofone F3 software version: **9999* Send

C113, C114, C115, C115i, C116, C117, C118 software version: #02#*

C138, C139, C140 software version: #02#*

C155, C156, C157 software version: #02#*

C257, C261 software version: #02#*

V171, V172, V173 software version: #02#*

V175, V176, V176 software version: #02#*

C168, W220 software version: *#**837#

W208, W375 software version: #02#*

ZTE Mobile1- *938*737381#

2- PHONE WILL DIPLAYED DONE

3- POWER OFF YOUR PHONE AND POWER ON AGAIN

alcatelE205

unlocking phone code,only press***847# without simcard

E900 software version: *#5002*8376263#

E900 full reset: *2767*3855#

Service codes Spice:

S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200

S410 engineer mode: *#3646633#

S900 software version: *#8375#

S900 serial no: *#33778#

Service codes Philips:

S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200

Service codes "Chinese" models:

default user code: 1122, 3344, 1234, 5678

Engineer mode: *#110*01#

Factory mode: *#987#

Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200

Restore factory settings: *#987*99#

LCD contrast: *#369#

software version: *#800#

software version: *#900#

Service codes BenQ:

software version: *#300#

test mode: *#302*20040615#

Service codes Pantech:

software version: *01763*79837#

service menu: *01763*476#

reset defaults (phone/user code reset to default): *01763*737381#

Service codes VK-Mobile 3xx, 5xx:

software version: *#79#

software version: *#837#

service menu: *#85*364# (hold #)

Service codes VK200, VK2000, VK2010, VK2020, VK4000:

software version: *#79#

service menu: *#9998*8336# (hold #)

reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

Service codes LG:

software version: 2945#*#

KG300 NVRAM format: 2945#*# -> menu 15

Service codes Sony-Ericsson:

J100 software version: #82#

Service codes Fly:

M100 software version: ####0000#

2040(i) reset defaults: *#987*99# Send

MX200 reset defaults: *#987*99# Send

MX200 software version: *#900# Send

SL300m reset defaults: *#987*99# Send

SL300m software version: *#900# Send

SL500m reset defaults: *#987*99# Send

SL500m software version: *#900# Send

MP500 reset defaults: *#987*99# Send

MP500 software version: *#900# Send

Set language to English: *#0044#

Set language to Russian: *#0007#

Service codes Konka:

C926 software version: *320# Send

C926 set default language: *#0000# Send

C926 set English language: *#0044# Send

Service codes GStar:

GM208 (Chinese Nokea 6230+) engineering menu: *#66*#

Set language to English: *#0044#

Set language to Russian: *#0007#

Service codes Motofone-F3:

Motofone F3 software version: **9999* Send

***300* Set SIM Pin

***310* / ***311* SIM Pin ON | OFF

***000* Reset Factory settings

***644* Set Voicemail number

***260* / ***261* Auto keypad lock ON | OFF

***510* / ***511* Voice Prompts ON | OFF

***160* / ***161* Restricted Calling (Phonebook only) ON | OFF

***200608* Send: software version

***200606* Send: software version

***200806* Send: flex version

***250* / ***251* Keypad tones ON | OFF

***470* Select time format

***500* /***501* Prepaid Balance Display ON | OFF

***520* Change language

Service codes Motorola:

C113, C114, C115, C115i, C116, C117, C118 software version: #02#*

C138, C139, C140 software version: #02#*

C155, C156, C157 software version: #02#*

C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*

V175, V176, V176 software version: #02#*

C168, W220 software version: *#**837#

W208, W375 software version: #02#*

and "yes"''

.................................................. ...............................

Read more

Nokia Service Code

Nokia unlock codes

Nokia phone unlock codes for free. There are different nokia unlock codes for different nokia models like nokia 6288, n95, Nokia 6682, 7270, 6280, 1600, Nokia 6130. Even there are two types of mobile unlocking service provider unlocking – sim unlock. You can also get mobile unlocking software that will generate codes for unlocking
Free Nokia Cell Phone Unlock Codes

1) Unlock Nokia 6600 (Orange, UK)
#pw+399466210777312+1#
#pw+719950237732007+5#
2) Unlock Nokia 3390 (Fido, Canada)
#pw+6595657252+1# or
#pw+4474052474+1#
3) Unlock Nokia 6102 (Cingular, USA)
#pw+939652056653040+1#
4) Unlock Nokia 6820b (AT&T, USA)
#pw+895421713251412+1#
5) Unlock Nokia 6102b (Cingular, USA)
#pw+324556243142742+1#
6) Unlock Nokia 6010 (T-Mobile, USA)
#pw+748900573631603+1#
7) Unlock Nokia 3120 (Vodafone, Spain)
#pw+008923325642375+7#
8) Unlock Nokia 6101 (T-Mobile, USA)
#pw+110464135761655+1#
9) Unlock Nokia 6230 (Vodafone, UK)
#pw+737190152533105+7#
10) Unlock Nokia 7600 (3 Network, UK)
#pw+448917267516205+1#



Unlock Codes for Mobile Phones- free Nokia Samsung Unlocks

NOKIA
cell phone code :These Free Nokia Unlock codes will work on most Nokia Mobile Phones
(1) *#06# For checking the International Mobile Equipment Identity (IMEI Number).
This is useful when your mobile is lost or stolen.Free Motorola and Samsung Unlock codes are in another post.

If u find any difficulty to understand this Unlock code for Mobile Phones please write in comment section.
2) *#0000# Displays your phones software version,
1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type. ( Favorite )
(3) *#9999# Phones software version if *#0000# does not work.
(4)*3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%



If mobile is locked you can check by this way

(8) #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(9) #pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(10) #pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(11) #pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

How To unlock mobile Phones like Samsung, Nokia and Motorola
For different networks they lock different locks. Each code also unlocks different locks. You need to type your code into your handset as follows
#pw+[one of the below numbers]+x#

{To get the p push your * key 3 times, the w is the * pushed 4 times and for + is the *pushed2 times. }
X= how far down that list the number you are using is...

014023433202622 (1)
426357740475450 (2)
907372026565074 (3)
845941163371047 (4)
484167302243762 (5)
497227217504624 (6)
705550724347656 (7)
You should always try code 7 and 1 first.
So you would type for code7

#pw+705550724347656+7# and
for code 1 it is
#pw+014023433202622+1#.To get the p push your * key 3 times, the w is the * pushed 4 times and+ is the pushed 2 times.
When the lock has been removed it will say "SIM restriction off" or somthing similar.

(12) *#147# (vodafone) this lets you know who called you last.
(13) *#1471# Last call (Only vodofone).
(14) *#21# Allows you to check the number that "All Calls" are diverted to
(15) *#2640# Displays security code in use.
(16) *#30# Lets you see the private number.
(17) *#43# Allows you to check the "Call Waiting" status of your phone.
(18) *#61# Allows you to check the number that "On No Reply" calls are diverted to.
(19) *#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to.
(20) *#67# Allows you to check the number that "On Busy Calls" are diverted to.
(21) *#67705646# Removes operator logo on 3310 & 3330.
(22) *#73# Reset phone timers and game scores.
(23) *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.
24) *#7760# Manufactures code.
(25) *#7780# Restore factory settings.
26) *#8110# Software version for the nokia 8110.
(27) *#92702689# (Favourite)
Displays -
1.Serial Number,
2.Date Made,
3.Purchase Date,
4.Date of last repair(0000 for no repairs),
5.Transfer User Data. To exit this mode you need to switch your phone off then on again.

(28) *#94870345123456789# Deactivate the PWM-Mem.
(29) **21*number# Turn on "All Calls" diverting to the phone number entered.
(30) **61*number# Turn on "No Reply" diverting to the phone number entered.
(31) **67*number# Turn on "On Busy" diverting to the phone number entered.
(32) 12345 This is the default security code.press and hold # Lets you switch between lines
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status: #pw+1234567890+3
SimCard lock status: #pw+1234567890+4


Nokia unlock codes 6110/6120/6130/6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #

NOKIA 3110
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #

NOKIA 3330 unlocks
*#06# This will show your warranty details *#92702689#
*3370# Basically increases the quality of calling sound, but decreases battery length.
#3370# Deactivates the above
*#0000# Shows your software version
*#746025625#This shows if your phone will allow sim clock stoppage
*4370# Half Rate Codec activation. It will automatically restart
#4370# Half Rate Codec deactivation. It will automatically restart

Restore Factory Settings To do this simply use this code
*#7780# Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only) This will put your phone into programming mode, and you'll bepresented with the programming menu.
2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours, ask your local dealer for it.
8) Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code To check the ISDN number on your Nokia use this Free nokia Unlock code *#92772689#.::

As I tried to collect most common Unlock code for mobile phones.It may not work with some models.

Read more

N900

Read more

nokia x3

Read more

6630

Read more

6610

Read more

6600s

Read more

6600 f

Read more

6600 2

Read more

6600 1

Read more

6510

Read more

6500s

Read more